1. Cycle furnace, check for flue draft and gas leaks
2. Record temp differences from supply and return air ( temp rise) 3. Check gas pressure at valve for proper adjustment 4. Test carbon monoxide in flue and inside home, test customers carbon monoxide tester 5. Inspect heat exchanger and face plate 6. Inspect condensate tubes, traps and pump 7. Check operation of safety limit controls, transformer, elements 8. Inspect sequencers and relays 9. Check fan, blower speed and amp draw 10. Check all electrical connections 11. Inspect and clean burners 12. Reading of ignition and sensor 13. Check control board and fuses 14. Replace filter with new 1inch filter 15. Inspect general condition of installation 16. Vacuum entire unit inside and out 17. Inquire if there are any obstructions in vents, supply or return air 18. Cycle furnace at thermostat, calibrate if necessary Call us today to schedule your tune up at 740-720-4300 If you need any additional services please feel free to call or go back to the home page to see how we can help you. We also offer duct cleanings to get all of the dirt cleaned out before you fire back up the furnace for the winter time!!
12 Comments
|
Archives
October 2016
Categories |